BLTYR - PH 12.45 BUFFER POWDER, 3010
- MSDS: BLTYR
- Manufacturer: BECKMAN INSTRUMENTS INC
- Product Name: PH 12.45 BUFFER POWDER, 3010
- National Stock Number: 6630-00-411-0297
Product Identification
Product ID:PH 12.45 BUFFER POWDER, 3010
MSDS Date:09/26/1985
FSC:6630
NIIN:00-411-0297
MSDS Number: BLTYR
Responsible Party
FULLERTON, CA 92634
US
Emergency Phone: 714-773-8061
Info Phone: 714-773-8061 714-833-0751
Cage: 05721
Contractor
Telephone: 714-773-8061
Cage: 05721
Ingredients
CALCIUM HYDROXIDE
CAS: 1305-62-0
RTECS: EW2800000
Fraction By Weight: 100%
OSHA PEL 15 MG/M3 TDUST
ACGIH TLV: 5 MG/M3; 9293
Hazards
LD50 LC50 Mixture:LD50: (ORAL,RAT) 7.3 GM/KG
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:IRRITATION OF EYES, SKIN AND
RESPIRATORY TRACT MAY OCCUR ON CONTACT OR IF DUST IS INHALED.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:NONE SPECIFIED BY MANUFACTURER.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:EYES: FLUSH WITH WATER FOR AT LEAST 15 MIN. SKIN: WASH
ARFFECTED SKIN AREAS THOROUGHLY. CONSULT A PHYSICIAN IF INGESTED OR
IF SYMPTOMS PERSIST. INHAL: REMOVE TO FRESH AIR. SUPPORT BREATHING.
(GIVE O*2 /ARTF RESP) .
Fire Fighting
Flash Point:NOT FLAMMABLE
Extinguishing Media:MEDIA SUITABLE FOR SURROUNDING FIRE .
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Accidental Release
Spill Release Procedures:CLEAN UP POWDER WITH CARE TO PREVENT DUST.
PLACE IN STEEL OR PLASTIC CONTAINER AND REMOVE FOR DISPOSAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:AVOID CONTACT AND INHALATION OF
POWDER.
Other Precautions:NONE
Exposure Controls
Respiratory Protection:WEAR NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE
FOR EXPOSURE OF CONCERN .
Protective Gloves:IMPERVIOUS GLOVES
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:NONE
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.
Chemical Properties
Spec Gravity:2.3 (H*20=1)
Solubility in Water:SOLUBLE
Appearance and Odor:WHITE POWDER
Stability
Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:NONE SPECIFIED BY MANUFACTURER.
Disposal
Waste Disposal Methods:REMOVE TO CHEMICAL LANDFILL OR MAKE INTO
SOLUTION AND NEUTRALIZE AND FLUSH DOWN DRAIN WITH PLENTY OF WATER.
DISPOSAL MUST BE IN ACCORDANCE WITH FEDERAL, STATE AND LOCAL
REGULATIONS .
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.